Shaper Machine is a general purpose shaper machine, which is used for surface processing of various small and medium-sized parts.
The machine tool is composed of bed, ram, rocker, gearbox, feed box, cross beam, workbench, lubrication system and electrical system.
The motor drives the ram through the gearbox and rocker mechanism, and the ram reciprocates in the guide rail of the top surface of the bed, and there is a six-speed change. The rail clearance can be adjusted with inserts. The front end of the ram is a tool rest and a turntable, and the tool rest can be fed along the slide of the tool rest. When planing the bevel, the turntable turns at a certain Angle as needed.
The beam can be used for manual or mechanical vertical feed along the front guide rail of the bed, and the table is installed on the beam, and the horizontal feed can be used for manual or mechanical feed along the beam guide rail. There are 12 kinds of feed in each case. The gap between the beam and the guide rail of the workbench can be adjusted by the box bar, and the front end of the workbench is supported to increase the stability of the work.
The horizontal or vertical feed direction of the table is controlled by a handle. The feed rate can be adjusted on the fly.
The main drive movement of the machine tool is provided with a brake, which can make the ram quickly stop in the required position, and the starting stop and braking of the machine tool are controlled by a handle.
The machine tool gearbox, feed box, ram guide rail, rocker mechanism are all centrally lubricated by the oil pump, and the oil supply can be adjusted according to needs.
| Specifications |
Units |
BC6050/6063/BC6066 |
| Maximum shaping length |
mm |
600/630/660 |
| Max.range of the horizontal movement of the table |
mm |
385 |
| Max.distance between the ram bottom and table |
mm |
630 |
| Max.length of the vertical movement of table |
mm |
360 |
| Dimension of table top(L*W) |
mm |
440x360/630X400/660X400 |
| Travel of tool head |
mm |
120 |
| Number of ram strokes per minute |
Times min |
14,20,28,40,56,80 |
| Swivel of tool head |
° |
+/-60 |
| Maximum size of tool shank(W*T) |
mm |
20X30 |
| Range of table feed |
Horizontal 12 steps |
mm |
0.4-5 |
| vertical 12 steps |
mm |
0.08-1.00 |
| Width of the T-slot for center positioning |
mm |
18 |
| Main motor power |
KW |
3 |
| Overall dimension(L*W*H) |
mm |
2000X1300X1550 |
| N.w./G.W |
kg |
1750/1870 |
| No. |
Item |
Specification |
Quantity |
Remark |
| 1 |
Shaper machine |
BC6050/BC6063/BC6066 |
1 set |
|
| 2 |
Ski pad |
|
|
|
| 3 |
Rubber pad of Ski pad |
|
|
|
| 4 |
Triangle belt |
A1499 |
|
|
| 5 |
Hex Wrench |
5mm |
1 pc |
|
| 6 |
Hex Wrench |
6mm |
1 pc |
|
| 7 |
Hand crank
|
|
1 pc |
|
| 8 |
Wrench |
24mm |
1 pc |
|
| 9 |
Wrench |
30mm |
1 pc |
|
| 10 |
Foundation bolt |
M16 |
4 pcs |
|
| 11 |
Oil Gun |
|
1 pc |
|
| 12 |
Operation Manual |
|
1 pc |
|
| 13 |
Packing List |
|
1 pc |
|
){kind=link}