| After-sales Service: | Overseas Service |
|---|---|
| Warranty: | 12 Months |
| Type: | Horizontal Lathe |
The appearance uses popular right Angle plane modeling, front and rear legs wide. The bed guide rail has been subjected to surface high-frequency quenching, grinding, quenching hardness G50. Headstock gear is processed by high-frequency quenching and precision grinding, and the gear precision can reach 6~7.
High strength cast iron bed
Bed guide rail adopts mountain and flat guide layout
High rigidity mechanical tool rest
Can process common metric, inch, module, diameter thread
| SPECIFICATION | CW62100E |
| Swing over bed | 1000mm |
| Swing in gap | 1230mm |
| Width over bedways | 550mm |
| Gap length (from spindle nose) | 350mm |
| Max Workpiece Length | 6000mm |
| Max turning length | 5850mm |
| Spindle center height | 515mm |
| Swing over cross slide | 710mm |
| SPINDLE | |
| Spindle bore Dia. | 105mm |
| Spindle nose | D11 |
| Taper of spindle bore | METRIC 120 (1:20) |
| No. of Spindle speed | 18 |
| Spindle speed ranges | 7.5~1000 rpm |
| Max spindle torque | 2400Nm |
| FEED BOX | |
| Spindle to feed box transmission ratio | 1:1 |
| Longitudinal and transverse feed series | 64kinds |
| Longitudinal feed range 16/1 | 0.1~1.52mm/r |
| Longitudinal feed range 1/1 | 1.6~24.3 mm/r |
| Longitudinal fine feed range | 0.05~12.15 mm/r |
| Transverse feed range | It's 1/2 of the longitudinal feed |
| Number of Metric Pitches | 52 |
| Range of Metric Pitches | 0.5 - 240mm |
| Number of Module Pitches | 53 |
| Range of Module Pitches | 0.5-120 MOD |
| Number of Imperial Pitches | 34 |
| Range of Imperial Pitches | 28-1 |
| Number of Diametric Pitches | 24 |
| Range of Diametric Pitches | 28-1 DP |
| TOOLPOST | |
| Distance from spindle center to tool support surface | 36mm |
| Max. dimension of tool shank | 30*30mm |
| Travel of top slide | 200mm |
| Rotation angle of top slide | ±90° |
| The pitch of the transverse screw | 5mm |
| Travel of tool post | 530mm |
| SLIDE BOX | |
| Longitudinal lead diameter | 55mm |
| Longitudinal lead pitch | 12mm |
| Rack modulus | 3mm |
| TAILSTOCK | |
| Tailstock quill diameter | 100mm |
| Tailstock quill taper | Morse No.6 |
| Tailstock quill travel | 250mm |
| Max. Transverse displacement of tailstock | ±10mm |
| MOTOR | |
| Main motor power | 11kW |
| Main motor speed | 1460r/min |
| Power of Fast moving motor tool post | 1.1kW |
| Speed of Fast moving motor tool carrier | 1350rpm |
| Motor power of cooling pump | 150W |
| Flow of cooling pump | 25L/min |
| Total capacity | 15kVA |
| Dimension & Weight | |
| Machine Dimension | 8240*1550*1830mm |
| Packing Dimension | 8550*1600*2140mm |
| NO. | ITEMS | NO. | ITEMS |
| 1 | 3-Jaw Chuck | 1 | 4 jaw chuck |
| 2 | C11/D11 | 2 | Steady Rest (<3000mm) |
| 3 | Toolpost Fast moving | 3 | Follow Rest (<3000mm) |
| 4 | 4 station toolpost | 4 | Screw Protection |
| 5 | Exchange Gear | 5 | Chuck Protection |
| 6 | Manual Tailstock | 6 | Toolpost Protection |
| 7 | Tool kits | 7 | Face Plate |
| 8 | Cooling system | 8 | Drive Plate |
| 9 | Y series Main Motor | 9 | Live Center |
| 10 | Working light |
