| After-sales Service: | Overseas Service |
|---|---|
| Warranty: | 12 Months |
| Type: | Horizontal Lathe |
CW-E series Mature structure, large power, strong rigidity, wide range of spindle speed regulation, suitable for strong force or high speed cutting, can complete the various shaft and disk parts of the inner and outer cylindrical surface, cone surface, end face, groove cutting, chamfering, drilling and tapping processes, and can process common metric thread. Ink thread, module thread, diameter thread and taper thread (special thread to consult), small tool rest can motor turning short cone, longitudinal feed to small tool rest feed compound movement can motor turning long cone, to large complex parts can show superiority.
Machine equipped with tail motor drive device for the user to choose, especially the length of the specifications of the larger, reduce the labor intensity, provide the working efficiency.
Machine is equipped with belt cover and safety warning signs, in order to prevent the machine operation personnel injury and equipment damage, according to user needs, chuck also provide protection, head protection and protection, in order to make sure you safe operation and the site clean.
| MACHINE TYPE | CW61125M-5000mm |
| Specification | |
| Max swing over bed | 1250mm |
| Bed width | 755 mm |
| Max workpiece length | 5000mm |
| Max turning length | 4800 mm |
| Center Hight | 625mm |
| Max swing over toolpost | 880mm |
| Max Weight of workpiece | 6T |
| Spindle box | |
| Spindle bore diameter | 130mm |
| The main shaft hole allows max. rod diameter | 128mm |
| Spindle Head type | A2-15 |
| Spindle bore front taper | Metric 140mm |
| Spindle speed step when forwarding | 21 |
| Spindle speed step when reverse | 12 |
| Spindle speed range (forward) | 3.15~315 rpm |
| Spindle speed range (reverse) | 4.5~390 rpm |
| max torque of spindle | 10.5 kNm(22kW) |
| 4-Cam Chuck | |
| 4-Cam Chuck diameter | 1000mm |
| Feeding box | |
| Spindle and feed box transmission ratio | 1:1 & 8:1 |
| Vertical and horizontal feed series | 56 kinds |
| Feeding range | |
| Vertical | 0.1~12mm/rpm |
| Horizontal | 0.05~6mm/rpm |
| Upper toolpost | 0.025~3mm/rpm |
| Metric thread | 1~120mm 52 kinds |
| Inch thread | 1/4-30 43 kinds |
| Module thread | 0.5~60mm 46 kinds |
| Pitch thread | 1/2~60DP 49 kinds |
| Toolpost | |
| Vertical distance between spindle center and tool installation surface | 47 mm |
| Tool section | 45x45 mm |
| Max travel of the Compound toolpost | 300 mm |
| Swing angel of toolpost | ±90° |
| Compound toolpost screw pitch | 6mm |
| Machine bed screw pitch | 5mm |
| Max horizontal travel of the cross slide | 670mm |
| Rapid traverse speed of the toolpost | |
| Crosswise | 1870 mm/min |
| Horizontal | 3740 mm/min |
| Compound rest | 935 mm/min |
| Sliding box | |
| Longitudinal lead screw diameter | 70mm |
| Longitudinal lead screw pitch | 12mm |
| Rack modulus | 5mm |
| Tailstock | |
| Center sleeve diameter | 160mm |
| Max travel of the center sleeve | 300 mm |
| Taper of the center sleeve taper bore | Metric 80mm |
| Motor | |
| Mian Motor Power | 22kw |
| Mian Motor speed | 960rpm |
| Sliding fast moving motor power | 1.5kw |
| Sliding fast moving motor speed | 2800rpm |
| Coolant pump power | 0.15kw |
| Coolant pump Flow quantity | 25L/min |
| Machine overall dimension | |
| Machine dimension | 7950*1955*2014mm |
| Packing dimension | 8200*2050*2180mm |
Machine headstock control handle adopts centralized control, convenient and flexible operation
