After-sales Service: | Overseas Service |
---|---|
Warranty: | 12 Months |
Type: | Horizontal Lathe |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
1).Because the bed is cast as a whole, the bed guide rail adopts mountain and plane guide rail layout, with a large bearing section, therefore, has good rigidity and shock absorption, can ensure high precision cutting.
2).Machine tool spindle adopts mechanical friction disc clutch: by controlling the bar, the spindle can change speed, stop and reverse direction without changing the motor speed and stop the motor.
3).High rigidity spindle: Type B is 82mm, type C is 105mm spindle aperture,D8 spindle head. High rigidity spindle system with three point support for B lathe.
4).High rigidity mechanical tool rest, high reliability, and high repeat positioning accuracy.
SPECIFICATION | CDS6266C |
Swing over bed | 660mm |
Swing in gap | 870mm |
Width over bedways | 394mm |
Gap length (from spindle nose) | 280mm |
Max Workpiece Length | 1500mm |
Max turning length | 1450mm |
Spindle center height | 325mm |
Swing over cross slide | 440mm |
SPINDLE | |
Spindle bore Dia. | 105mm |
Spindle nose | D8 |
Taper of spindle bore | 110 mm / 1:20 |
No. of Spindle speed | 16 |
Spindle speed ranges | 26~1700 rpm |
Max spindle torque | 1100Nm |
FEED BOX | |
Cross feed | 45kinds, 0.022 ~0.74mm/rev |
Longitudinal feed | 45kinds, 0.044 ~ 1.48mm/rev |
Number of Metric Pitches | 73 |
Range of Metric Pitches | 0.5 - 80mm |
Number of Module Pitches | 45 |
Range of Module Pitches | 0.5-40 MOD |
Number of Imperial Pitches | 47 |
Range of Imperial Pitches | 7 / 16 ~ 80 TPI |
Number of Diametric Pitches | 47 |
Range of Diametric Pitches | 7/8 ~ 160 |
TOOLPOST | |
Distance from spindle center to tool support surface | 27mm |
Max. dimension of tool shank | 25*25mm |
Travel of top slide | 150mm |
Rotation angle of top slide | ±45° |
The pitch of the transverse screw | 5mm |
Travel of tool post-- Vertical | 340mm |
Travel of tool post --Longitudinal | 2950mm |
Speed of tool post-- Vertical | 2.1m/min |
Speed of tool post-- Longitudinal | 4.2m/min |
SLIDE BOX | |
Longitudinal lead diameter | 40mm |
Longitudinal lead pitch | 12mm |
Rack modulus | 2.5mm |
TAILSTOCK | |
Tailstock quill diameter | 75mm |
Tailstock quill taper | No 5 MT |
Tailstock quill travel | 150mm |
Max. Transverse displacement of tailstock | ±15mm |
MOTOR | |
Main motor power | 7.5kW |
Main motor speed | 1440r/min |
Power of Fast moving motor tool post | 275W 1/3HP |
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES |
1 | 3-Jaw Chuck | 1 | Steady Rest --φ30~φ200mm |
2 | D8 Spindle | 2 | Follow Rest--φ20~φ110mm |
3 | Toolpost Fast moving | 3 | Screw Protection |
4 | Working Light-24V | 4 | Chuck Protection |
5 | 4 station toolpost | 5 | Toolpost Protection |
6 | Pedal brake | 6 | Face Plate |
7 | Exchange Gear | 7 | Drive Plate |
8 | Manual Tailstock | ||
9 | Tool kits | ||
10 | Cooling system | ||
11 | Y series Main Motor | ||
12 | Low voltage control 24V | ||
13 | Left hand wheel sliding box |
It has high measuring accuracy and excellent performance
Suppliers with verified business licenses