The FANUC 0I-MF PLUS(5) system comes with a 10.4 "color LCD monitor
High strength cast iron bed
Spindle tooth belt drive
Rigid tapping
24 manipulator knife library
Sliding guide rail (X-65mm, Y-130 mm, Z-100 mm)
Servo motor directly connected with large, double pre-tension screw (X -φ40 mm, Y -φ40 mm, Z -φ40 mm)
Faster fast moving speed (X-24m /min, Y-24m /min, Z-20m /min)
| ITEM |
VDF850 |
VDF1200 |
VDF1500 |
VDF1800 |
| Woktable Size |
1000*500mm |
1220*620mm |
1700*800mm |
2000*800mm |
| Worktable T-Slot |
5*18*100mm |
5*18*100mm |
6*18*125mm |
6*18*125mm |
| Worktable Load |
500kg |
1200kg |
2500kg |
2500kg |
| X/Y/Z-Axis Travel |
860*510*560mm |
1220*620*685mm |
1560*830*790mm |
1880*830*790mm |
| Spindle Speed |
8000pm |
6000rpm |
6000rpm |
6000rpm |
| Spindle Taper |
No.40 (7:24) |
No.50 (7:24) |
No.50 (7:24) |
No.50 (7:24) |
| Tool Magazine Capacity |
24 Bar Arm Type |
24 Bar Arm Type |
24 Bar Arm Type |
24 Bar Arm Type |
| Machine Weight |
5600kg |
8500kg |
14000 |
14500 |
| Machine Size |
2496*2530*2679mm |
2990*2621*2759mm |
4580*3250*3120mm |
5200*3250*3120mm |
Machine tool bed body high strength cast iron casting, casting structure after machine tool dynamics analysis and finite element analysis, reasonable collocation reinforcement structure, organization, stable, permanent to ensure quality. Ensure the basis a high rigidity. Width of machine tools bed structure, load full support of the cross slide can ensure processing heavy load capacity.
The tool store is a manipulator tool changing device: the capacity of the tool store is 24 pieces, double-arm automatic tool changing arm and CAM tool changing machine, driven by motor, fast and stable. Cutter sleeve large capacity tool storage bin, motor and cylinder CAM driving and positioning mechanism, high stability. Also can choose the hat knife library (special configuration) : the capacity of the knife library is 20, the knife head to choose the nearest knife, knife change action for pneumatic and electric control, no pollution, easy maintenance, tool exchange fast and reliable.
The machine bed is made of high strength cast iron. The structure of the casting is analyzed by machine tool dynamics and finite element analysis. The structure of the reinforcing bar is reasonably matched and the organization is stable to ensure the quality forever. Ensure the high rigidity of the base parts. Wide and solid machine bed structure, full load supported cross slide table can ensure the heavy load capacity during processing. Fully hardened sliding guide rails, coupled with precision grinding process, combine to produce satisfactory precision quality.
The X, Y, Z coordinate screw of the machine tool adopts high-precision ball screw pair, adopts special bearing for the screw, the front 3 and the back 2 are fixed, and the double nuts are pretightened, so that the rigidity is strengthened and the accuracy is more stable. After pre-stretching, the ball screw greatly increases the transmission stiffness and eliminates the influence of thermal deformation caused by fast movement. Dual-frequency laser interferometer is used as pitch compensation for all three axes, thus ensuring the positioning accuracy and repeated positioning accuracy of the machine tool
High speed, high precision spindle: through high torsion gear belt transmission, no slip, and can greatly reduce transmission noise and heat generation. Spindle adopts precision grade bevel ball bearing, standard speed up to 6000r/min. High performance grease lubricated spindle bearing, economical spindle head cooling system, effectively control spindle high speed temperature rise. Spindle using IRD dynamic balance more positive equipment, direct correction of spindle dynamic balance, so that the spindle in high speed operation, avoid resonance phenomenon, to ensure the best machining accuracy
| STANDARD ACCESSORY |
OPTIONAL ACCESSORY |
| 1 |
FANUC 0i MF (5) Controller |
1 |
Siemens 828D Controller |
| 2 |
24 Bar Arm Type tool magazine |
2 |
20 Bar Bamboo Type tool magazine |
| 3 |
Spiral chip remover and chip storage car |
3 |
X/Y/Z-Axis Guideway Protection Cover |
| 4 |
One-piece safety cover |
4 |
Spindle oil cooling device |
| 5 |
Automatic lubrication system |
5 |
Automatic measuring system for workpiece |
| 6 |
Tool box |
6 |
Tool break detection system |
| 7 |
Working light |
7 |
The 4-Axis Rotary Table |
| 8 |
Warning light |
|
|
| 9 |
Electrical box heat exchanger |
|
|
| 10 |
Spindle air curtain dust prevention system |
|
|
| 11 |
Spindle taper hole blower |
|
|
| 12 |
Rigid Tapping |
|
|
| 13 |
Workpiece cooling system |
|
|
| 14 |
The RS - 232 interface and function of DNC |
|
|
| 15 |
Open the door protection device (door) |
|
|
| 16 |
Blowing dust air gun |
|
|
| 17 |
Simple oil-water separator |
|
|
| 18 |
Foundation bolts and block |
|
|
| 19 |
Operation Manual, Packing List, Certificate of Quality |
|
|
Audited Supplier 
){kind=link}